Hide thumbs Also See for X1:
Table of Contents

Advertisement

4.
Insert a plug into the socket in the vehicle.
5.
Correct tyre inflation pressure to 2.5 bar.
Increase pressure: switch on the com‐
pressor with the engine running or the
ignition switched on.
Reduce pressure: press the button on
the compressor.
Continuing with journey
Do not exceed maximum permitted speed of
80 km/h, approximately 50 mph.
Reinitialise runflat indicator.
Reinitialise Tyre Pressure Monitor.
Have the punctured tyre and the sealant con‐
tainer of the Mobility system replaced as soon
as possible.

Snow chains

Fine-link snow chains
Only certain fine-link snow chains have been
tested, found safe for use in traffic, and cate‐
gorised as suitable by the manufacturer of your
vehicle.
Information regarding suitable snow chains is
available from a Service Partner or a qualified
specialist workshop.
Using
Snow chains may only be used in pairs on the
front wheels with tyres of the following sizes:
205/60 R 17
Online Edition for Part no. 01 40 2 964 279 - VI/15
Wheels and tyres
Observe the snow chain manufacturer's notes.
Ensure that the snow chains are always ade‐
quately taut. Re-tighten them if necessary in
accordance with the chain manufacturer's in‐
structions.
Do not initialise the runflat indicator with snow
chains fitted, as the instrument might other‐
wise issue an incorrect reading.
Do not initialise the Tyre Pressure Monitor with
snow chains fitted, as the instrument might
otherwise issue an incorrect reading.
When driving with snow chains, activate Dy‐
namic Traction Control briefly if necessary.
Maximum speed with snow chains
When snow chains are fitted, do not exceed
50 km/h, 30 mph.
Mobility
207

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents