Seat And Mirror Memory - BMW X1 Owner's Handbook Manual

Controls
Adjusting height
▷ Up: push.
▷ Down: press the button, arrow 1, and slide
the head restraint downwards.
Removing
Only remove the head restraint if no-one will
be sitting on the seat in question.
1. Raise head restraint until resistance.
2. Press the button, arrow 1, and pull the
head restraint fully out.

Seat and mirror memory

Notes
WARNING
Using the memory function during the
journey can lead to unexpected seat move‐
ments. You could lose control of the vehicle.
Danger of accidents. Only call up the memory
function at a standstill◀
58
Adjusting
Online Edition for Part no. 01 40 2 964 279 - VI/15
WARNING
Danger of trapping when moving the
seats. Danger of injury or damage to property.
Before making the setting, make sure that the
movement area of the seat is clear.◀
Principle
Two different positions for driver's seat and
exterior mirrors can be saved and recalled per
profile. Settings for backrest width and lumbar
support are not saved.
Overview
Saving
1. Switch on ignition.
2. Set desired position.
3. Press button briefly. LED in button
is illuminated.
4. Press the desired button 1 or 2 while the
LED is lit. LED turns off.
If SET button was pressed inadvertently:
Press the button again.
LED turns off.
Recalling
General
There are two possibilities of calling up the
memory function:
▷ Comfort function, see page 59.
▷ Safety function, see page 59.