BMW X1 Owner's Handbook Manual page 220

Mobility
Access to turn indicators, low-beam
headlights, high-beam headlights/
headlight flash
Follow the general instructions, see page 218.
Open the bonnet.
Turn indicator
21 Watts bulb, PY21W.
1. Access to the turn indicator on the right
side: unhook and fold away the filler neck
for the washer fluid using the screwdriver
from the on-board tool kit.
2. Turn the bulb holder anticlockwise and re‐
move.
3. Press the bulb gently into the fitting, turn
anticlockwise and remove.
4. Fit new bulb and bulb holder in the reverse
sequence.
Low-beam headlights
Bulb 55 watts, H7LL.
1. Access to the low-beam headlights on the
right side: unhook and fold away the filler
220
Replacing parts
Online Edition for Part no. 01 40 2 964 279 - VI/15
neck for the washer fluid using the screw‐
driver from the on-board tool kit.
2. Turn the cover anticlockwise and remove.
3. Pull bulb holder off straight backwards, ar‐
row 1, and remove.
4. Carefully remove bulb from bulb holder.
5. Fit new bulb with bulb holder in the reverse
sequence.
When doing this, position lug of bulb cor‐
rectly in headlight housing and feel bulb
holder engage.
6. Close the headlight casing with the lid. En‐
sure that the lid engages.