BMW X1 Owner's Handbook Manual page 59

Convenience function
1. Open the driver's door.
2. Switch ignition off if necessary.
3. Briefly press button 1 or 2 as desired.
The relevant seat adjustment is done automat‐
ically.
The process is cancelled if a seat adjustment
switch or one of the buttons is pressed.
Safety function
1. Close the driver's door or switch the igni‐
tion on.
2. Keep button 1 or 2 pressed as desired until
the adjustment procedure has been con‐
cluded.
Calling up has been disabled
After a short time, calling up saved seat posi‐
tions is disabled to prevent the battery from
being discharged.
To reactivate calling up:
▷ Open or close a door or the tailgate.
▷ Press a button on the remote control.
▷ Press the start/stop button.
Mirrors
Exterior mirrors
General
Depending on the equipment, the mirror set‐
ting is saved for the profile currently in use.
When the vehicle is unlocked using the remote
control, this position is called up automatically
if the setting for this has been enabled.
Note
WARNING
Objects reflected in the mirrors are
closer than they appear. The distance to road
users behind the vehicle could be incorrectly
Online Edition for Part no. 01 40 2 964 279 - VI/15
Adjusting
estimated, for example when changing lane.
Danger of accidents. Look over your shoulder
to estimate the distance from following traf‐
fic.◀
Overview
1 Adjusting 59
2 Left/right, automatic parking function
3 Folding in and out 60
Selecting a mirror
Switching to other mirror:
Push switch.
Electrical adjustment
Corresponding to movement of button
Saving positions
Seat and mirror position memory, see page 58.
Adjusting manually
In the event of an electrical defect, for example,
press the borders of the mirror glass.
Automatic parking function
Principle
When reverse gear is engaged, mirror glass on
front passenger side is titled downwards. This
improves the view of the kerb or other obsta‐
Controls
59