Braking - Honda VTX1800R Owner's Manual

Your motorcycle is equipped with a new
linked braking system. Operating the front
brake lever applies the front brake.
Operating the rear brake pedal applies the
rear brake and a portion of the front brake.
For full braking effectiveness, use both
the lever and pedal simultaneously, as you
would with a conventional motorcycle
braking system.
As with a conventional motorcycle
braking system, excessively hard
application of the brake controls may
cause wheel lock, reducing control of the
motorcycle.
To slow or stop, apply the brake lever and
brake pedal smoothly, while downshifting
to match your speed.
Gradually increase braking as you feel the
brakes slowing your speed. The increase
in engine compression from downshifting
will help slow your motorcycle.
To prevent stalling the engine, pull the
clutch lever in before coming to a
complete stop. For support, put your left
foot down first, then your right foot when
you are through using the brake pedal.
Applying the brakes too hard may cause
the wheels to lock and slide, reducing
control of your motorcycle. If this happens,
release the brake controls, steer straight
ahead until you regain control, then
reapply the brakes more gently.
Basic Operation & Riding

Braking

43