Advertisement
SSE 5000 Portable Radio Quick Guide
Accessory Installation
Antenna:
• ATTACH: With the radio turned off, twist the antenna clock-
wise onto the connector on the top of the radio.
• REMOVE: With the radio turned off, twist the antenna
counter-clockwise to remove it from the radio.
Battery:
• ATTACH: With the radio turned off, align the baseplate on the
bottom of the radio with the groove on the top of the battery,
and slide the battery toward the latch until it clicks into place.
• REMOVE: With the radio turned off, slide the battery latch up
and hold it while sliding the battery away from the latch.
Belt Clip:
• ATTACH: With the battery removed, hook the top of the belt
clip into the slot near the top of the radio in the back. Press
the bottom of the belt clip into the slot near the base of the
radio until it clicks into place.
• REMOVE: With the battery removed, use a small, flat-bladed
screwdriver to disengage the locking tab on the bottom of the
belt clip from the base of the radio. Lift the belt clip up and
away from the radio.
Location of
antenna
connector
6881094C16-O
Advertisement
