Configuring The Phone Through Web Browser; Accessing The Web Configuration Menu - Huawei EchoLife ET323 User Manual

EchoLife ET523 IP Phone User Manual

Configuring the Phone Through Web Browser

The web server embedded in ET523 responds to HTTP/HTTPS GET/POST requests.
Embedded HTML pages allow a user to configure the IP phone through any web
browser.

Accessing the Web Configuration Menu

To access the web configuration menu of the phone, do as follows:
Step 1
Connect the computer with the phone in the same network.
Step 2
Make sure the phone is powered on and displays the IP address.
Step 3
Start the web browser on your computer.
Step 4
Enter the phone' s IP-address in the address bar of the browser.
Step 5
Enter the administrator' s password to access the web configuration menu.
Note:
The web-enabled computer has to be connected to the same sub-network as the

phone. This can easily be done by connecting the computer to the same hub or
switch as the phone is connected to. In absence of a hub/switch (or free ports on the
hub/switch), connect the computer directly to the phone by using the PC port on the
phone.
If the phone is properly connected to a working Internet, the phone will display its

IP address. The format of the address is " xxx.xxx.xxx.xxx" , in which " xxx"stands
for a number from 0-255. You need this number to access the web configuration
Menu. For example, if the phone displays 192168000160, enter
http://192.168.0.160 in the address bar of the browser.
The default administrator password is admin; the default end user password is 123.

Figure 4-2 Login page
28
4 Configuration Guide