Firmware Upgrade Through Tftp/Http - Huawei EchoLife ET325 Manual

Manual do Usuário - EchoLife
ET325 IP Phone
5
Software Upgrade &
Customization
Upgrade the software (or firmware) through either TFTP or
HTTP. The corresponding configuration settings are in the
Advanced Settings configuration page.
5.1

Firmware Upgrade through TFTP/HTTP

To upgrade through TFTP or HTTP, select the TFTP or HTTP
upgrade method. Set Upgrade Server to a valid URL of the
HTTP server. The server name can be in either FQDN or IP
address format. Here are examples of valid URLs.
um.huawei.com/etphone
168.75.215.189
There are two ways to set up the upgrade server to upgrade the
firmware:
Keypad menu
Web configuration interface
5.1.1 Keypad Menu
Choose Config > Upgrade to configure the upgrade server
through the keypad menu. Under the submenu, you can edit the
IP address and domain name of the upgrade server. Choose
TFTP or HTTP from the Upgrade Via menu. Press MENU to
confirm and exit the menu. Then choose Reboot from the main
5 Software Upgrade &
Customization
56