How To Use (Porridge Cooking) - Panasonic SR-TP184 Operating Instructions Manual

HOW TO USE
1. Measure rice with the measuring cup provided (refer to the specifi cations table below).
Wash the rice in a separate bowl until water is relatively clear.
2. Put the washed rice into the pan. Add water.
Servings
Rice quantity
Water quantity
Cooking time
*For porridge cooking, rice and water are measured with the measuring cup provided.
Do not measure with the water level indicator on the pan.
Above table is for reference only. Adjust amount of water to your personal taste.
3. Place the pan into the body. Make sure that the pan is directly in
contact with the heating plate by turning it slightly to the right and to
the left until it sits properly.
NOTE: If the outer surface of the pan is wet, it may cause a cracking noise
when the rice cooker heats up.
This may damage the rice cooker, so make sure that it is in dry
condition before use.
4. Close the outer lid until it clicks.
Please make sure that the steam cap is properly attached.
NOTE: If the outer lid is not closed securely, the porridge cooking effi ciency
will be affected.
5. Attach the connector to the rice cooker socket and plug to the
power supply source.
NOTE: Do not plug in until just before start to cook.
6. Press the select switch to 'Porridge' position. When the power supply source is switched on, the keeping warm
indicator will light up. To cook, press the switch button down. The cooking indicator will light up indicating that
porridge cooking has been started.
NOTE: The porridge will continue cooking until power supply source is SWITCHED OFF MANUALLY.
RZ19CZ01 T0914-0_MA.indb 9 RZ19CZ01 T0914-0_MA.indb 9
(Porridge Cooking)
4 – 5 persons
1 cup*
10 cups*
2-4 hours
SR-TP184
Bowl
Connector
SR-TP184
SR-TP184
SR-TP184
Plug
9
10/9/57 BE 9:47 AM 10/9/57 BE 9:47 AM