Advertisement
XV-D9000
<Removing DVD mechanism unit>
Removing the clamper base (See Fig.1)
* Remove the top cover.
* Remove the DVD mechanism unit.
1. Remove the two screws A attaching the clamper base.
Removing the loading tray (See Fig.2~4)
* Remove the clamper base.
1. Turn the up-down cam lever clockwise (in the direction
of the arrow in Fig.2) to lower the position of the mechanism.
2. Manually set the loading tray to the fully-open position.
3. Stretch the tray stoppers on both sides of the loading
base outward and pull out the tray.
Tray stopper
Loading tray
Tray stopper
Fig.4
1-14
Clamper base
Loading base
Up-down cam
Loading base
Loading tray
A
Fig.1
Loading tray (front side)
Fig.2
Loading tray
Fig.3
A
Lever
Push
Push
Advertisement
