Download Print this page

Product Components - Hoover FREEJET EVO Instruction Manual

Hide thumbs Also See for FREEJET EVO:

Advertisement

of this appliance we recommend that any servicing or repairs are
only carried out by an authorised Hoover service engineer.
Do not replace the batteries with non-rechargeable batteries.
Do frequently clean the dust cup and filter assembly.
the environment
The symbol on this appliance indicates that this appliance may not be treated as household
waste. Instead it must be handed over to the applicable collection point for the recycling of
electrical and electronic equipment. Disposal must be carried out in accordance with local
environmental regulations for waste disposal. For more detailed information about treatment,
recovery and recycling of this appliance, please contact your local city office, your household
and waste disposal service or the shop where you purchased the appliance.
This appliance complies with the European Directives 2014/35/EU, 2014/30/EU and 2011/65/EU.
CANDY HOOVER GROUP S.r.l. Via Privata Eden Fumagalli, 20861 Brugherio (MB) Italy

PRODUCT COMPONENTS

Main Cleaner
A.
On/Off Switch And Mode Selector
B.
Main Body
C.
Foldaway Handle Release Button
D.
Handheld Release Button
E.
Handheld Unit
F.
Nozzle Release Button
G.
Motorized Nozzle*
Floor Nozzle *
G1.
H.
Agitator Release Button**
I.
Crevice Tool / Dusting Brush
J.
Product Holder
K.
Charger
PREPARINg yOUR ClEANER
1. Unfold the handle to the main body until it locks in place. [1]
2. Attach the nozzle to the main body, push firmly until it locks in place. [2]
3. For first use, charge your cleaner for 24Hrs. After first use the normal charging time is 12Hrs.
4. When the product is charging the middle indicator light will be red and will turn blue when fully
charged.
5. The product holder can be fixed to the wall using the screws provided. [5b]
Note: To remove the nozzle, press the nozzle release button and pull away from the main body.
Note: Use only the charger supplied with your cleaner to recharge.
IMPoRtANt: When charging the cleaner, the On/Off switch must be OFF.
It is normal for the charger to become warm to touch when charging.
If the operating time reduces after repeated use let the cleaner run until it stops then recharge it for 24Hrs,
repeat this monthly for optimum performance.
Unplug the charger in the event of prolonged absence (holidays, etc.). Recharge product again before use
as battery may self discharge over increased periods of storage.
*Nozzle design may vary according to models
Handheld Cleaner
L.
On/Off Switch
M.
LED Indicator
N.
Dust Container Release Button
O.
Dust Container
P.
Dust Bin Flap release Button
Filter
Q.
Cloth Filter
**Motorized Nozzle only
3
GB

Advertisement

loading