Advertisement
USINg yOUR ClEANER
Main Cleaner With Motorized Nozzle [G]*
Turn the cleaner on by sliding the On/Off switch to the following settings [4]:
• HARD FLOOR: First position of On/Off switch ideal for hard floor surfaces, the cleaner is in the lower
settings
and the agitator** and nozzle LED lights** are OFF.
,
• CARPET: Second position of On/Off switch ideal for carpets and rugs, the cleaner is in the higher
settings
and the agitator** and nozzle LED lights **are ON.
,
Main Cleaner With Floor Nozzle [G1]*
Turn the cleaner on by sliding the ON/OFF switch forwards to one of the following settings [4]:
Power Level I: First position of On/Off switch. Ideal for simple cleaning tasks, the cleaner is in the lower
setting.
Power Level II: Second position of On/Off switch. For tougher cleaning tasks, the cleaner is in the higher
setting.
Handheld Cleaner
1. Press the handheld release button, lift the handheld unit from the main body.
2. Turn the handheld cleaner on by sliding the On/Off switch forward.
DISCHARGe INDICAtoR: When the batteries are fully discharged, the indicator will flash about 20 times
before cleaner switches off automatically.
Crevice tool / Dusting Brush
The accessory is stored at the rear of the main body, they can be fitted directly onto the handheld unit.
Take it out from the rear of the main body before use, [15a] and put it back after use. [15b]
IMPoRtANt: For storage, the product handle can be fixed into the holder [5b] or it can be folded for
easy storage. [5a]
ClEANER MAINTENANCE
emptying the Dust Container
Hold the handheld cleaning unit over a bin and press the dust bin release flap button to empty the dust
container. [8]
Cleaning the Filter
1. Press the handheld unit release button, lift the handheld unit from cleaner main body. [6]
2. Press the dust container release button and remove the dust container. [9]
3. Lift the filter from the dust container. [10]
4. Wash the filter in lukewarm water and leave to dry for 24 Hrs. [11b,12] Once thoroughly dry return to
the dust container.
5. If required, wash the dust container in lukewarm water. [11a] Ensure it is fully dry before returning to
the main body of the cleaner.
6. Reassemble the handheld unit and return to the cleaner main body. [13,14]
Note: Do not use hot water or detergents when cleaning the filters. In the unlikely event of the filters
becoming damaged, fit a genuine Hoover replacement. Do not try to use the product without a filter fitted.
IMPoRtANt: For optimum performance, always keep your filter clean. We recommend that the filter should
be washed at least once a month.
Changing and Cleaning the Agitator**
IMPoRtANt: Always switch off the cleaner before changing the agitator.
1. Open the Agitator Release Button outward. [16]
2. Remove the Agitator. [16]
3. Replace with the new Agitator or clean it.
5. Re- fit the Agitator and press the Agitator Release Button until it locks in place.
Battery Replacement
When the batteries fail to maintain charge, please contact the Hoover Customer Service Centre to obtain a
replacement battery.
WARNING: Only use approved replacement parts for your vacuum cleaner. Using parts not validated by
*Nozzle design may vary according to models
[7]
**Motorized Nozzle only
4
GB
[6]
Advertisement
