Product Components - Hoover H FREE 500 User Manual

Do not replace the batteries with non-rechargeable batteries.
The Environment:
This appliance is marked according to the European directive 2011/65/EC on Waste Electrical and Electronic
Equipment (WEEE). By ensuring this product is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise be caused by inappropriate
waste handling of this product. The symbol on the product indicates that this product may not be treated
as household waste. Instead it shall be handed over to the applicable collection point for the recycling of
electrical and electronic equipment. Disposal must be carried out in accordance with local environmental
regulations for waste disposal. For more detailed information about treatment, recovery and recycling of this
product, please contact your local city office, your household waste disposal service or the shop where you purchased
the product.
This product complies with the European Directives 2014/35/EU, 2014/30/EU and 2011/65/EU.
CANDY HOOVER GROUP S.r.l. Via Privata Eden Fumagalli, 20861 Brugherio (MB) Italy

PRODUCT COMPONENTS

A. ON/OFF Button
B. Turbo Button
C. Silent Button
D. Dust Cup
E. Dust Bin Flap Release Button
F. Handheld Release Button
G. Storage Release Button
H. Tube
I. Nozzle Release Button
J. Nozzle
K. Nozzle Front Led Lights
L. Nozzle Release Flap
M. Brush Bar Status Led*
N. Pre-Motor Filter
O. Single Cyclone Vortex Finder
P. Single Cyclone
Q. Power Mode Led Light
PREPARING YOUR CLEANER
Carefully remove your product from the packaging.
1. Pick up the nozzle and extention tube, assemble one end of the tube into the nozzle neck until you hear it 'click'
into location. [1a]
Pick up the Handheld unit and assemble onto the tube until you hear it 'click' into location. [1b]
2.
Fix the Wall Mount to your wall using the screws and screw plugs provided. [2]
3.
4. To fully charge the appliance, connect the charger jack plug to the battery pack. It will take around 6Hrs.
NOTE: To remove the nozzle, press the nozzle release button and pull away from the main body.
NOTE: Use only the charger supplied with your cleaner to recharge. It is normal for the charger to become warm to touch
when charging.
* Certain Models Only
R. Battery Status Led Light
S. Battery Charging Light
T. Battery Release Button
U. Battery Pack
V. Battery Charging Inlet
W. Charger
X. Wall Mount*
Y. Wall Mount Screws*
Z. Integrated 2in1
Dusting Brush and Furniture Tool
AA. Mini Turbo Nozzle*
AB. Long Crevice Tool*
AC. Accessories Bag*
AD. Rear Soft Strip
AE. Intense Floor Roller
AF. Wiper Blade
AG. Dust Bin Cleaning Tool*
AH. Deep Care Roller*
3
GB