Unpacking; Unpacking The Inverter; Components; Features - Westinghouse WH2200iXLT User Manual

UNPACKING

UNPACKING THE INVERTER

!
Always have assistance when lifting
the inverter. The inverter is heavy;
lifting it could cause bodily harm.
Avoid cutting on or near staples to
!
prevent personal injury.
Tools required – box cutter or similar device.
1. Carefully cut the packing tape on top of the carton.
2. Fold back top flaps to reveal the manual. Remove the document and save it for reference.
3. Carefully cut two sides of the carton to remove the inverter.

Components:

Tool Bag (1)
Screwdriver (1)

FEATURES

GENERAL INVERTER FEATURES

1
9
1 - Control Panel: Contains the reset breaker,
outlets and warning lights.
2 - 12-Volt DC Power Socket: Provides 12-volt
DC power up to 8 amps.
3 - Recoil Handle: Pull to start the engine.
4 - Engine/Fuel Control Switch: Turns the
engine and the fuel on and off.
5 - Spark Plug Access Cover: Remove the
cover to service the spark plug.
9
CAUTION
Bottle of SAE 15W-40 Oil (1)
Oil Fill Bottle (1)
2
3
8
4
7
6 - Engine Oil Fill/Drain Plug Service Panel:
Remove the panel to access the engine oil fill/
drain plug for maintenance.
7 - Air Cleaner Access Panel: Remove the panel
to access the air cleaner for maintenance.
8 - Fuel Cap and Vent: Open vent to run the engine,
and close the vent when the engine is off.
9 - Muffler and Spark Arrestor: Avoid contact until
the engine is cooled down. The spark arrestor
prevents sparks from exiting the muffler. It must
be removed for servicing.
5
Figure 9
6