Installation of indoor unit
2. Make the power connection wire go
through the cable-cross hole at the back
of indoor unit and then pull it out from
the front side.
3. Remove the wire clip; connect the power connection wire to the wiring terminal
with wire clip.
4. Put wiring cover back and then tighten the screw.
5. Close the panel.
Notice before installation
1. How to install the over line pipe(According to the direction as show.)
wire pipe
Fixed nut
Note:
N(1)
Outdoor unit connection
Screw
2
cable-cross
hole
power connection
wire
2
white
black
red
green
(blue)
(brown)
(yellow-
green)