Friedrich MWM36Y3J Installation And Operation Manual page 11

Remote Control Instructions
14
SLEEP:
Press this button to go into the SLEEP operation mode. Press it again to cancel this
function. This function is available in COOL
comfortable temperature for you.
15
LIGHT:
Press LIGHT button to turn on the display's light and press this button again to turn off
the display's light. If the light is turned on,
disappears.
16
Combination of "+" and "-" buttons: About lock
Press "+ + " and "- - " buttons simultaneously to lock or unlock the keypad. If the remote
controller is locked,
three times.
17
Combination of "MODE" and "-" buttons:
"
, press
When the unit is OFF
1.Remove the battery cover plate from the rear of the remote controller.
Notes:
When replacing the batteries, do not use old or different types of
batterie it may cause malfunction.
If the remote controller will not be used for a long time, please
3 feet
should be kept
If the remote controller does not operate normally,
reinsert fter 30 seconds. If
batteries.
or DRY mode to maintain the most
is displayed. If the light is tunrned off ,
is pressing any button,
displayed. In this case,
Allows you to toggle between Fahrenheit and Celsius.
"
" - "
MODE
and buttons simultaneously to switch between
Replacement of Batteries
away from the TV set or stereo .
, replace the
blinks
batteries and
and .