Connecting Z-Wave Device Drivers To Motorization, Sensor Or Light Drivers; Available Devices - Z-Wave Control4 Setup Manual

Connecting Z-Wave device drivers to motorization,
sensor or light drivers

Available Devices

To connect a Z-Wave device driver to a motorization, sensor or light driver:
1 In Connections under the Control/AV tab, select the Z-Wave device driver.
The Control & Audio Video Connections window will show the available
connections.
2 Click on the Control Output connection Door/Window Sensor and the
available devices to connect appear below in the CONTACT_SENSOR Input
Devices window.
3 Click and drag the contact sensor output in the upper window to the
contact sensor input in the lower window. When a valid connection is
available, the cursor changes and has a + symbol. Release the mouse
button to make the connection.
When the Z-Wave devices are connected to the appropriate motorization,
sensor or light drivers, the UI will now show appropriate drivers to represent the
Z-Wave devices. Now the Z-Wave device drivers must be connected to the
Z-Wave controller and identified in the project.
When the device is identified and added to the Z-Wave network, the Available
Devices window will show the device online with a green icon. A Z-Wave device
that is added to the Z-Wave network and also identified to a device driver will
show the device driver name and location next to the Node ID.
9