Making A Conference Call; Answering Or Rejecting An Incoming Call; Call Waiting - Nokia 7210 User Manual

54543_en1.fm Page 22 Friday, August 2, 2002 11:59 AM
C a l l f u n c t i o n s

Making a conference call

Conference calling is a network service that allows up to six persons to
take part in a conference call.
1. Make a call to the first participant.
2. To make a call to a new participant, press
call.
3. Key in, or retrieve from the memory, the phone number of the new
participant and press Call. The first call is put on hold.
4. When the new call has been answered, join the first participant in
the conference call. Press
5. To add a new participant to the call, repeat steps 2 to 4.
6. To have a private conversation with one of the participants:
Press Options and select
Rejoin the conference call as described in step 4.
7. To end the conference call, press

Answering or rejecting an incoming call

Press to answer the incoming call and press
Press to reject the incoming call.
If you press Silence, only the ringing tone is muted. Then either answer
or reject the call.
If the headset HDB-4 or HDS-3 is connected to the phone, you can
answer and end a call by pressing the headset key.
Tip: If the Divert if busy
for example to your voice mailbox, rejecting an incoming call
will also divert the call. See Call divert on page 52.

Call waiting

During a call, press
on hold. Press to end the active call.
To activate the Call waiting
22
Options
Options and select Conference.
Private and select the desired participant.
.
function is activated to divert the calls,
to answer the waiting call. The first call is put
function, see Call waiting on page 53.
and select New
to end the call.