Service Commands - Nokia 7210 User Manual

54543_en1.fm Page 48 Friday, August 2, 2002 11:59 AM
M e n u f u n c t i o n s
• Connection settings. Define WAP connection settings for retrieving
multimedia messages. Activate the set where you want to save the
connection settings and then edit the settings.
• Settings' name. Key in the new name for the connection set and
press OK.
• Homepage. Key in the homepage address of the WAP service that
you want to use, press
• Session mode. Select
• Data bearer. Select GPRS.
• GPRS access point. Key in the access point name and press OK. An
access point name is needed to establish a connection to a GPRS
network. You obtain the access point name from your network
operator or service provider.
• IP address. Key in the address, press
You obtain the IP address from your network operator or service
provider.
• Authentication
• User name. Key in the user name and press OK.
• Password. Key in the password and press OK.
• Allow adverts. You can receive or reject advertisements.
To receive the multimedia connection settings as a text message
You may receive the service settings as a text message from the network
operator or service provider that offers the WAP service that you want
to use. For more information, contact your network operator or service
provider, or visit Club Nokia's website (www.club.nokia.com).
Font size setting
To select the font size for reading and writing messages, press Menu,
and select Messages, Message

Service commands

Press Menu, and select
send service requests (also known as USSD commands), such as
activation commands for network services, to your service provider.
48
for a dot, and press OK.
Permanent or Temporary.
for a dot, and press OK.
type. Select Secure or Normal.
settings, Other settings
Messages and Service commands. Key in and
and Font size.