Download  Print this page

Resetting The Unit; Canceling The Demo Mode; Preparing The Card Remote Commander; Setting The Clock - Sony MEX-BT2800 User Manual

Bluetooth audio system.
Hide thumbs

Advertisement

E:\DATA\4157841111\4157841111MEXBT2800U\01US02CD-U.fm
00US+00COV-U.book Page 8 Wednesday, July 22, 2009 1:27 PM

Resetting the unit

Before operating the unit for the first time, or
after replacing the car battery or changing the
connections, you must reset the unit.
Detach the front panel (page 8) and press the
RESET button (page 15) with a pointed object,
such as a ball-point pen.
Note
Pressing the RESET button will erase the clock setting
and some stored contents.

Canceling the DEMO mode

You can cancel the demonstration display which
appears during turning off.
1
Press and hold the select button.
The setup display appears.
2
Press the select button repeatedly
until "DEMO" appears.
3
Rotate the control dial to select
"DEMO-OFF."
4
Press and hold the select button.
The setup is complete and the display returns
to normal reception/play mode.
Preparing the card remote
commander
Remove the insulation film.
Tip
For how to replace the battery, see page 31.
Preparing the card remote
commander
Remove the insulation film.
Tip
For how to replace the battery, see page 31.
8

Setting the clock

The clock uses a 12-hour digital indication.
The clock uses a 24-hour digital indication.
The clock uses a 12-hour digital indication.
1
Press and hold the select button.
The setup display appears.
2
Press the select button repeatedly
until "CLOCK-ADJ" appears.
3
Press (SEEK) +.
The hour indication flashes.
4
Rotate the control dial to set the hour
and minute.
To move the digital indication, press (SEEK)
–/+.
5
After setting the minute, press the
select button.
The setup is complete and the clock starts.
To display the clock, press (DSPL/SCRL). Press
(DSPL/SCRL) again to return to the previous
display.
Tip
You can set the clock automatically with the RDS
feature (page 19).
Tip
You can set the clock automatically with the RDS
feature (page 20).
Tip
You can set the clock automatically with the RDS
feature (page 21).

Detaching the front panel

You can detach the front panel of this unit to
prevent theft.
Caution alarm
If you turn the ignition switch to the OFF
position without detaching the front panel, the
caution alarm will sound for a few seconds.
The alarm will only sound if the built-in
amplifier is used.
1
Press and hold (SOURCE/OFF).
The unit is turned off.
2
Press
MEX-BT2850MEX-BT2800MEX-BT2800
4-157-841-41(1)4-157-841-21(1)4-157-841-11(1)
, then pull it off towards you.
(SOURCE/OFF)
masterpage:Left

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: