Table of Contents
Advertisement
Hookups With a Cable Box/Direct Broadcast System (cont'd) 11
With this connection:
You may watch one channel while recording another.
You may not record scrambled channels.
1
ANT-IN
ANT-OUT
Cable
Signal
Connections
1
Connect a Cable signal to the DVD/VCR's ANT-IN (Antenna In)
Jack.
2
Use an RF coaxial cable (supplied) to connect the ANT-OUT
(Antenna Out) Jack on the DVD/VCR to the IN Jack on the Cable
Box/DBS.
3
Use a second RF coaxial cable to connect the OUT Jack on the
Cable Box/DBS to the ANTENNA IN Jack on the TV.
Recording One Channel/Watching Another
1
Put the Cable Box/DBS on the same channel as the
DVD/VCR's CH3/CH4 switch. Set the TV to the Cable
Box/DBS output channel (03 or 04).
Then, with the DVD/VCR in VCR position (the VCR light and the
VCR/TV light will appear on the display panel), use the CHAN-
NEL o/p buttons to select the channel you want to
record at the DVD/VCR. Start the recording.
2
Press the VCR/TV button once to put the DVD/VCR in
TV position. (The VCR/TV light will disappear.)
3
Select the channel you want to watch at the Cable
Box/DBS.
DVD/VCR
2
DVD/VCR
IN
OUT
L
DVD/VCR
AUDIO OUT
AUDIO
L
R
R
VIDEO
CH3 CH4
RF coaxial
cable
Cable Box/DBS
IN
O U T
RF coaxial
cable
• When you play a tape, make sure
the Cable Box/DBS is set to the
same channel as the CH3/CH4
switch on the DVD/VCR. Set the
TV to the Cable Box/DBS output
channel (03 or 04).
7 5
A N T
/
C A B
L E
3
TV's ANTENNA
IN Jack
Helpful Hint
Advertisement
Table of Contents
