Fm/Am Operation; Bt Operation; Paring And Connecting; During Playing - SoundLogic 927032 Instruction Manual

FM/AM operation

1. Press AM/FM until radio FM or AM appears
on the display.
2. Press the AM/FM button to switch between AM
and FM.
3. TUNE+ TUNE-
Hold and
stations. When a station is found, the unit will
stop and start playing.
4. Press button, then PX will appear on the
MEM
display. Press or
M+ M-
place you want the station to be stored. Then
press MEM button again to store.
M+ M-
5. Press or button to listen to the preset
stations.
NOTE:
SCAN
- Press button on the remote control to
search and store the stations automatically.
-The radio will automatically receive FM radio
broadcasts in stereo (when available). Alternatively,
you can manually set the radio to mono mode by
pressing ST/MO button on remote control. the signal
strength
is low, and background noise level is high.

BT operation

Paring and Connecting

1. Press BT button until bt appears on the display
after a beep sound, the unit will start to search
for the last conncted device if it is found. If it is
not found,the unit will search for other devices.
2. Activate the Bluetooth connection on the external
device.
3. When
"SOUNDLOGIC DES"
choose to pair with it.
4. bt on the display will be solid light,
is estalished.
NOTE:
Enter 0000 when asked for a password
during connecting.
PAIR
5. Hold button on the control panel or press
PAIR
button on the remote control to disconnect

During Playing

(
-Press and button to skip to the previous or
next track.
-Press button to pause the playback, press again
to resume the playback.
(
NOTE:
buttons may not work with all
the Bluetooth sources.
button search for the
button to select the
appears on the list,
when connection
12
CD/MP3 disc operation
1. Press button until CD appears
CD
on the display.
2.Load the disc,it will play automatically.
3. Press button to eject disc when finished.
During Playing
(
-Press and button to skip to the previous or
next track.
-Press button to pause the playback, press again
to resume the playback.
-Press button to stop the playback
RAN
-Press button to turn on or enter or exit the
random playing.
REP
-Press button to perform the repeat playback.
PROG
-Press button to play the contents in the pre-
selected order.
Programme procedure
1.During CD/MP3 playing, press STOP, then press
PROG, "PRO " will display on screen.
2.Press PREV/NEXT to select the track needed to
programme, at the same time, the selected tracks
display on screen, the press PROG to confirm.
Note: If do not press PREV/NEXT to select track
at this time, programming function will
exit after 20 seconds,
3.If continuing to add tracks, repeat number 2
operation.
4.To complete programming, press PLAY to start
playing the programmed tracks. Press STOP twice to
cancel programming.

USB operation

1. Press the
USB
on the display.
2. Insert the USB device into the USB port. Then
it will start playing.
During Playing
(
-Press and button to skip to the previous or
next track.
-Press button to pause playing, press again
to resume the play.
-Press button to stop the play, Press again
to resume.
automatically
the character disappear.
button until USB appears