User Instructions; Making The Connections; General Operation; Time Setting - SoundLogic 927032 Instruction Manual

User Instructions

Making the connections

AUX AUDIO CONNECTION
Using a 3.5mm audio cable ( supplied), it is
possible to connect an external audio device
EG:- MP3 player to the unit.
NOTE: This function requires the AUDIO
CONNECTION to be made to an external amplifier.
This will NOT work connected to a TV input.
1. Connect a 3.5mm cable into the AUX IN 1 input
socket on the control panel.
2. Connect the other end to your audio devices
headphone output or Line-out.
AUX IN 1
3. Press the SOURCE
button until AUX IN 1
appears on the display.
4. Press PLAY on the external audio source EG:-
MP3 player.
NOTE: The audio output level is effected by the
volume on the source EG: MP3 player so make
sure that is set to about 70-80% (not too loud to
avoid distortion).
5. Adjust the VOLUME control on the amplifier to
set the main volume level.
Using a RCA audio cable ( supplied), it is
possible to connect an external device
EG:- DVD player / VCR to the unit.
Audio Output
Jacks on the
DVD / VCR / DVR
Red
MP3 PLAYER
L R
AUX IN 2
White
Red
DVD Player
11
1.Connect the AV cable to the Audio Output Jacks
(White Jack=L, Red Jack=R) on DVD player
and Audio Input Jacks on the rear of
NOTE:
A TV can also be connected to watch video files in
the
DVD player/VCR/DVR and etc.
SOURCE
2.Press button until AUX 2 appears on the
display.
3. Activate the external device.

General operation

Time setting

1. Place the unit into Standby mode.
2. Hold TIME button on the remote control to start
the time setting.Then "12Hr"or "24Hr" will appear
on
screen and the hour digit will flash.
3. Press TIME +/- button to set 12h or 24h.
Then press TIME button to confirm.
4. PressTIME +/- to set hour and press
confirmand minute digit will flash..
5. Press TIME +/- to set minute digit.Press "TIME"
to confirm.

Alarm setting

1. Place the unit into Standby mode.
ALARM
2. Hold button on the remote control to
activate the alarm setting.
TIME+ TIME-
3. Press and
and the minute. Then press
TIME+ TIME-
4. Press or
rings as FM ("F")or buzzer("b"). Then press
button to confirm.
5. Press "TIME +/-" to set alarm volume level.

Snooze

Snooze Snooze Snooze
When the alarm rings, press Snooze
off the ring and 9 minutes later, the alarm will ring
again.

Sleep timer

During playback, press
to set the playback duration and after the time
reaches, the unit will automatically turn itself off.
ranges from 10-90 minutes.
The duration

Dimmer

DIMMER
Press button to adjust the display
brightness.
the unit.
"TIME" to
button to adjust the hour
ALARM
button to confirm.
button to select the alarm
ALARM
Snooze Snooze Snooze Snooze Snooze Snooze button to turn Snooze Snooze
SLEEP
button repeatedly