Troubleshooting - Sega GHOST SQUAD - EVOLUTION Manual

15

TROUBLESHOOTING

● If an error message is displayed, have the problem looked at by a store main-
tenance person or a technician. Unless the problem is addressed by someone
15
with specialized knowledge or skills, there could be electrical shock, short cir-
cuits or fire. If there are no store maintenance people or technicians, cut off the
power immediately and contact the office shown in this manual or the dealer
from whom the product was originally purchased.
● If problems other than those covered in this manual arise, or if no improvements
can be noted after measures given in this manual have been taken, do not
take measures indiscriminately. Cut off the power immediately and contact the
office shown in this manual or the dealer from whom the product was originally
purchased. Indiscriminate countermeasures could lead to unforeseeable ac-
cidents. They could also result in permanent damages.
● When working with the product, be sure to turn the power off. Working with the
power on may cause an electric shock or short circuit.
● Be careful not to damage the wires. Damaged wires may cause an electric
shock, short circuit or present a risk of fire.
● After the cause of circuit protector activation has been removed, have the cir-
cuit protector re-engaged. If the unit is used continuously as is, there could be
heat generation or fire, depending on the cause of the activation.
● When removing and replacing parts, take due care not to trap or pinch your
fingers.
● The Control Units contain gears, cams and other moving machine parts. Take
due care not to trap or pinch your fingers.
An error message indicates an error with the game board. Check the separate LINDBERGH Service Manual for
more details.
If a problem has occurred, first inspect the connection of the wiring connector.
88