Sega GHOST SQUAD - EVOLUTION Manual page 19

● Handle moulded parts with care. Excessive weight or pressure may cause them
to break and the broken pieces may cause injury.
● To perform the operation safely and accurately you must use a safe, steady
footstool or stepladder. Working without this may lead to a fall and possible
injury.
6
● When connecting the connectors on the DVD wire, you must carefully check
the tags on the wire to find the correct connector. Even when you have the cor-
rect connector, you must pay careful attention to the direction and angle of
insertion. Attempting to forcefully connect the incorrect connector or connect-
ing a connector at the wrong angle or facing may damage the connector and
could lead to overheating and burn related injuries.
● When attaching or removing doors or lids, be careful that your hand or finger
does not get caught in anything.
● Be very careful when handling the projector screen. The screen can be dam-
aged easily and cannot be repaired once damaged. Such damage can only
be repaired by completely replacing the screen.
● Be careful not to damage parts surfaces. In some cases, if such surfaces are
damaged, the part must be replaced; it cannot be reinforced or repaired.
● This product is a game machine for indoor use only Do not install it outdoors. Even
indoors, do not install it in the following places. Such locations can cause fire,
electric shock, injury or breakdowns.
● Areas exposed to direct sunlight, close to heating equipment, or other hot plac-
es.
● Areas exposed to leakage of rainwater, or in very humid places, such as close to
an indoor pool or shower.
● Areas filled with flammable gas, or near to chemicals or hazardous substances
that are highly flammable or volatile.
● Areas with high dust concentrations.
● Inclined surfaces.
● Areas of intense vibration.
● Close to safety equipment such as emergency exits and fire extinguishers
●Areas outside the appropriate usage temperature (ambient temperature) range
is 5 to 30 degrees Centigrade.
14