Playback; Picture Scanning; Instant View; Still Picture - Philips TYPE VR 175 Operating Instructions Manual

2.

PLAYBACK

1
Insert the cassette into the cassette slot.
2
Press the playback button
3
Picture scanning: Press the
I
(forward) button once or several times.
STOP h
4
Interrupt: Press the
5
Wind and rewind: Interrupt the playback function and
H
press the (rewind) or
If, during wind/rewind, you want to have a quick access
to picture scanning, use the 'Instant View' function.
6
INSTANT VIEW: If you hold the
I
(Wind) button during wind or rewind, you will
switch to picture scanning. If you release the buttons,
the video recorder will automatically switch back to
rewind or wind again.
7
Eject a cassette: Interrupt the playback function and
hSTOP/JEJECT
press the
Notes: Some functions switch off automatically after a
while (e.g.: Pause, Still Picture, Scanning). This helps to
protect the cassette and prevent unnecessary power
consumption.
* The picture quality will deteriorate during Picture
Scanning. The sound is turned off.
PLAY G
.
H
(reverse) or
button.
I
(wind) button.
0:20
H
(Rewind) or
button on the video recorder.

Still picture

STILL R
1
Press the button. You see a still picture.
Interference stripes will appear on the screen.
STILL R
2
Each time you press
move on one step.
Note: If the still picture vibrates vertically, hold the
P r P q
or the button at step
minimal. This setting will be stored automatically.
Please note, however, that interference may still occur
with poor quality cassettes.

Tape position/Index search

Tape position: The elapsed playback time, given to the hour
and minute, appears in the display.
If you want to set the indicator to '0:00' , press the
CLEAR (CL)
button.
When you insert a cassette, the indicator is automatically
set to '0:00' .
Index search: At the beginning of each recording, the video
recorder marks the tape with a code mark. You can search
for these code marks on the tape. Once the video recorder
finds the code mark or a blank space it will automatically
switch to playback.
INDEX E
1
Press the button and then press the
button to select the next code mark or the
for the previous code mark.
Note: You cannot use the function 'Index search' with
recordings made on another video recorder that does
not have this code mark function.
again, the picture will
1
until the vibration is
I
H
button
5