Manual channel search
In certain cases the Automatic Channel Search may not be
able to find all of the TV channels (e.g. coded TV channels).
You can then use this manual method to set the channels.
1
Switch on the TV set. Press the
the video recorder.
2
Select and confirm 'MANUAL SEARCH' .
3
P q
Hold the
button until you have found the right TV
channel. A changing channel number or frequency will
appear on the TV screen.
4
Confirm with the
OK
5
Select and confirm the programme number that you wish
to allocate to this TV channel (e.g.: 'P 01' ).
6
If you want to allocate more TV channels, repeat
3
5
steps
to
until all TV channels have been stored.
7
STANDBY m
To end, press the
Note: Channel number or frequency can also be entered
directly at step
3
, using the
* To enter a special/hyperband channel, first enter the
channel digit '9'. The indication changes from 'CH' to
'CA'. For example, for special channel 'S 30', enter '9 30'.
AUTOINSTALL
button on
button.
button.
0-9
buttons.
11