Table of Contents
Advertisement
0
5
1
6
2
7
3
8
4
9
(Selection Mode)
MANUAL
System
INSTALLATION
Search
Programme No.
Store
Manual installation
10
Searching for and storing TV channels is done channel by channel.
11
You must go through every step of the Manual Installation menu.
12
13
Selection Mode is only present and lights up if the country you selected also
...
offers the channel option (C-channels for aerial channels, S-channels for cable
channels).
You can choose either channel or frequency mode.
& Select the TV system
•
Select the country or part of the world from where you want to receive the
TV channel.
If you are connected to a cable system, select your country.
é Search for a TV channel
The frequency or the channel number increases until a TV channel is found.
In case of poor reception, you can improve the reception by adjusting the
frequency with the
Direct selection of a TV channel
If you know the frequency, or the C- or S-channel number, enter it directly
with the digit keys 0 to 9.
Ask for a list from your cable company or dealer, alternatively consult the
Table of frequencies on the inside backcover of this handbook.
" Enter the programme number with the digit keys.
' Store steps & till "
•
Select Store and press the blue OK key.
Repeat every step to store another TV channel.
To exit from the menu :
•
Press the red
R
key.
key.
MENU
5
- Quick Links:
- Your Remote Control
- Use of the Remote Control
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the TV Remote Control and is the answer not in the manual?
Questions and answers
Phillips One touch streaming remote want work with fire TV even pressing the button
The Philips TV Remote Control may not be working with Fire TV due to one or more of the following reasons:
1. Battery Issues: The batteries might be weak or dead. It is suggested to use brand new batteries.
2. Remote Malfunction: The remote may not be sending an infrared (IR) signal. You can test this by using a smartphone camera to see if a red light appears when pressing buttons.
3. TV Not Responding: The TV should be powered on using the physical button on the TV itself before using the remote.
4. Compatibility: Philips TV remotes may not be compatible with Fire TV unless the TV supports HDMI-CEC and it is enabled.
5. Button Pressing: The remote buttons may not be registering inputs. Press each button firmly multiple times to ensure contact.
These steps help identify if the issue is with the remote, battery, or compatibility.
This answer is automatically generated