Table of Contents
Advertisement
o
π
Select
p
œ
MENU
Return / Switch menu off
Activate
OK
Menu Language
INSTALLATION
Country
Automatic Installation
Manual Installation
English
•••
MENU
•••
•••
LANGUAGE
•••
•••
UK
COUNTRY
•••
•••
AUTOMATIC
Automatic Installation
INSTALLATION
Searching 0 % ................... 100 %
0
1
BBC1
2
BBC2
3
...
4
...
.
...
.
...
.
...
AUTOMATIC
Automatic Installation
INSTALLATION
4
& Select the Menu Language and press the blue OK key.
é Select your language and press the blue OK key.
" Select Country and press the blue OK key.
•••
•••
' Select the country where you are now located and press the blue OK key.
•••
•••
•••
Other
•
10
...
11
...
12
...
13
...
..
...
..
...
..
...
..
...
On
•
Store TV channels
Select the menu language and country
First, you have to select your language and your country.
Select Other when none of the countries applies.
You can now search for and store the TV channels in two different ways: using
automatic installation or manual installation (tuning-in channel by
channel).
Select your choice and press the blue OK key.
Automatic installation
In the Automatic Installation menu select On with the CD keys to activate the
searching. All TV channels are searched for and stored automatically.
If a cable system which broadcasts ACI (Automatic Channel Installation) or a
TV channel transmitting a teletext page with the frequencies and programme
names of all the TV channels which can be received, is detected, the search is
stopped and a programme list appears.
The programme list is automatically filled with all the programme numbers and
names of the TV channels transmitted.
It is possible that the cable company or the TV channel displays a broadcast selection
menu. Layout and items are defined by the cable company or the TV channel.
Make your choice with the B keys and press the blue OK key.
To exit from the menu
Press the red
key.
MENU
Go on to page 6.
- Quick Links:
- Your Remote Control
- Use of the Remote Control
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the TV Remote Control and is the answer not in the manual?
Questions and answers
Phillips One touch streaming remote want work with fire TV even pressing the button
The Philips TV Remote Control may not be working with Fire TV due to one or more of the following reasons:
1. Battery Issues: The batteries might be weak or dead. It is suggested to use brand new batteries.
2. Remote Malfunction: The remote may not be sending an infrared (IR) signal. You can test this by using a smartphone camera to see if a red light appears when pressing buttons.
3. TV Not Responding: The TV should be powered on using the physical button on the TV itself before using the remote.
4. Compatibility: Philips TV remotes may not be compatible with Fire TV unless the TV supports HDMI-CEC and it is enabled.
5. Button Pressing: The remote buttons may not be registering inputs. Press each button firmly multiple times to ensure contact.
These steps help identify if the issue is with the remote, battery, or compatibility.
This answer is automatically generated