Table of Contents
Advertisement
Manual Installation
(Selection Mode)
J
System
System
K
Programme No.
Search
Store
Manual installation
Searching for and storing TV channels is done channel by channel.
You must go through every step of the Manual Installation menu.
Selection Mode is only present and lights up if the country you selected also
offers the channel option (C-channels for aerial channels, S-channels for cable
channels).
You can choose either channel or frequency mode.
& Select the TV system
•
Select the country or part of the world from where you want to receive the
TV channel.
•
If you are connected to a cable system, select your country.
é Enter the programme number with the digit keys.
" Search for a TV channel
The frequency or the channel number increases until a TV channel is found.
In case of poor reception, you can improve the reception by adjusting the
frequency with the + P - key.
Direct selection of a TV channel
If you know the frequency, or the C- or S-channel number, enter it directly
with the digit keys 0 to 9.
Ask for a list from your cable company or dealer, alternatively consult the
Table of frequencies on the inside backcover of this handbook.
' Store steps & till "
•
Select Store and press the OK key in the centre of the cursor.
After the new or extra TV channel has been stored, the TV automatically transfers that
(those) TV channel(s) to the video recorder provided with the EasyLink function.
The message : EasyLink : Downloading Presets ... appears on the screen. The
programme list of the video recorder is now equal to the one of the TV.
Repeat every step to store another TV channel.
To exit from the menu :
•
Press the red ® key.
5
Advertisement
Table of Contents
