Table of Contents
Advertisement
1
16
•
•
•
•
1
2
3
•
1
•
•
•
AUDIO
•
n
•
Camera and camcorder
Connect your camera or camcorder at the front side of your TV.
Connect the equipment to
Press the X key under the door of the remote control repeatedly to select
the sound coming from one or both loudspeakers of your TV.
1 for stereo equipment.
Also connect
AUDIO R
S-VHS quality with a S-VHS camcorder is obtained by connecting the S-VHS
input 3and
cables with the
S-VHS
Other equipments
Connect the eurocable 1 to
Only for CD-i and Photo CD :
Press f and U at the same time.
Menu Language
INSTALLATION
Country
Automatic Installation
Manual Installation
Give Name
Reshuffle
Favourite Programmes
Setup
Select CD-i/Photo CD Present in the Setup menu of the
menu.
This offers you optimum picture quality for your CD-i or Photo CD.
Keep the red
key pressed to switch off all menus.
MENU
Audio equipment
Connect the audio cables to the audio input of your audio equipment and to
and
at the back of your TV.
AUDIO L
R
You can listen to your TV sound via your audio equipment.
Headphone
Insert the plug into the headphone socket L at the front side of the TV.
Press ¬ to switch off the internal loudspeakers of the TV.
The headphone impedance must be between 8 and 4000 Ohm. The headphone
socket has a 3.5 mm jack.
In the
menu select Headphone to adjust the headphone volume and
SOUND
to select dubbed or original language (when the TV channel broadcasts in two
languages) for your headphone sound. See p. 10.
If you want to connect more equipment to your TV, consult your dealer.
2 and
1 for mono equipment.
VIDEO
AUDIO L
inputs 1.
AUDIO
as shown opposite.
EXTERNAL 1
SETUP
CD-i/Photo CD
Present
Decoder/Descrambler
Information line
INSTALLATION
- Quick Links:
- Your Remote Control
- Use of the Remote Control
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the TV Remote Control and is the answer not in the manual?
Questions and answers
Phillips One touch streaming remote want work with fire TV even pressing the button
The Philips TV Remote Control may not be working with Fire TV due to one or more of the following reasons:
1. Battery Issues: The batteries might be weak or dead. It is suggested to use brand new batteries.
2. Remote Malfunction: The remote may not be sending an infrared (IR) signal. You can test this by using a smartphone camera to see if a red light appears when pressing buttons.
3. TV Not Responding: The TV should be powered on using the physical button on the TV itself before using the remote.
4. Compatibility: Philips TV remotes may not be compatible with Fire TV unless the TV supports HDMI-CEC and it is enabled.
5. Button Pressing: The remote buttons may not be registering inputs. Press each button firmly multiple times to ensure contact.
These steps help identify if the issue is with the remote, battery, or compatibility.
This answer is automatically generated