Programming Frequencies - Uniden BC244CLT Manual

BC244clt.qxd 2/10/99

Programming Frequencies

Before you can use your BC244CLT scaner, you must program the channels except
weather frequencies. Follow these steps:
Example: Program 420.150 MHz into Channel 12.
1. Press MANUAL to stop scanning.
2. To select the channel (12), press 1 , then 2 on
the numeric keypad. Then press MANUAL
again.
3. Type in the frequency numbers, including the
decimal point, using the numeric keypad:
420.150.
4. Press E to complete the entry.
3:34 PM Page 13
13