Set The Squelch - Uniden BC244CLT Manual

BC244clt.qxd 2/10/99
Alarm will sound as a series of beeps gradually growing louder. Alarm will
continue for approximately 15 minutes if no action is taken. To activate the
snooze function simply press any key. The alarm will silence but will continue to
activate at 9 minute intervals for approximately an hour.
The snooze alarm continues to operate while Scanner is turned on and in any
mode, if you would like to listen to the scanner while waking up.
To turn the alarm function off, press the
ALARM key. ALARM Icon in display
extinguishes.

Set the Squelch

1. Turn SQUELCH fully clockwise to
the highest setting.
2. Press ON/OFF key to turn on the scanner.
2. Adjust the VOLUME control to where you
can hear a steady noise.
3:34 PM Page 10
10