Step 1: Make sure the NVR is connected to a network via a router or a
switch, or directly connected to PC.
Step 2: Turn on the computer and insert the D-Link DNS-722-4/DNS-726-4
Autorun CD into the CD-ROM drive. The following step-by-step instructions
displayed are shown when using Windows Vista operating system. The
steps and screens are similar for other Windows operating systems.
Click NVR Search Utility.
Highlight an available NVR
and click Configuration to
access the web-based utility.
For detailed configuration instructions, please refer to the User Manual on
the CD-ROM.
D-Link DNS-722-4/726-4 Quick Install Guide
Getting Started
12