Sony HCD-VZ30AV Service Manual page 20

QQ
3 7 63 1515 0
3. Mode: Playback
Test tape
P-4-A100
(10 kHz, –10 dB)
Pin 1
L-CH
MAIN
L
board
CN301
R
set
R-CH
Pin 3
Waveform of oscilloscope
In phase 45°
Good
4. After the adjustments, apply suitable locking compound to
the parts adjusted.
Adjustment Location: Playback Head (Deck A)
Record/Playback/Erase Head (Deck B)
TE
L 13942296513
Reverse
www
.
20
http://www.xiaoyu163.com
Oscilloscope
Pin 2
H
V
90° 135 ° 180 °
Wrong
Foward
x ao
y
i
http://www.xiaoyu163.com
8
Tape Speed Adjustment (Deck A, Deck B)
Note: Set the test mode using the following method and begin tape
speed adjustment.
In the test mode, the speed will switch to double speed or
normal speed each time the HI-DUB button is pressed.
Procedure:
With the ?/1 button ON, press the x button, DISPLAY button,
and DISC 3 button simultaneously.
(The "VOLUME" on the fluorescent display tube will blink while
in the test mode.)
To exit the test mode, press the ?/1 button.
1. Insert the WS-48B into deck B.
2. Press the H button of deck B.
3. Press the HI-DUB button and play the tape at double speed.
4. Adjust RV1001 of the LEAF SW board so that the reading
of the frequency counter becomes 6000 ± 180 Hz.
5. Press the HI-DUB button and play the tape at normal speed.
6. Adjust RV1002 of the LEAF SW board so that the reading
of the frequency counter becomes 3000 ± 90 Hz.
Adjustment Location: LEAF SW board
Sample Value of Wow and flutter
W.RMS (JIS) less than 0.3%
(test tape: WS-48B)
Playback Level Adjustment (Deck A, Deck B)
Q Q
3 6 7 1 3
Procedure:
Mode: Playback
Test tape
P-4-L300
(315 Hz, 0 dB)
Set
MAIN board
CN301 (Pin 1 : L-CH)
Deck A is RV311 (L-CH) and RV411 (R-CH), deck B is RV301
(L-CH) and RV401 (R-CH)
so that adjustment within the following adjustment level.
Adjustment level:
CN301 playback level: 301.5 to 338.3 mV (–8.2 to –7.2 dB)
level difference between the channels: within ± 0.5 dB
Adjustment Location: AUDIO board
Adjustment Location
[LEAF SW BOARD]
u163
RV1002 RV1001
.
2 9 9 4 2 8
1 5 0 5 8 2 9 9 4
Level meter
+
–
(Pin 3 : R-CH)
RV1001(High Speed)
RV1002(Normal Speed)
m
co
9 9
2 8 9 9