Roland rubix 22 Reference Manual page 22

Troubleshooting
Problem Items to check
Are multiple programs running?
Did you adjust the software's audio
buffer size?
Windows
Did you adjust the USB driver's audio
buffer size?
Windows
Is the system software up to date?
Are the drivers for the computer's
internal chipset and graphics card
up to date?
Are the drivers for the computer's
LAN hardware (wired and wireless)
up to date?
Windows
Is the power management setting in
Sound is
Windows set to economy mode?
interrupted during
playback or
recording
Windows
Could the system performance
settings be set to "Program"?
Is the Rubix connected to a USB
hub?
Are you using the included USB
cable?
22
Action
Exit programs that are not in use.
If the software allows you to adjust the audio buffer size, change the buffer size.
Refer to the documentation for your software.
Increase the size of the USB driver's audio buffer (p. 16).
Run Windows Update or Microsoft Update and make sure the system software is up
to date.
Update to the latest drivers.
Install the latest LAN hardware drivers.
If the problem is not resolved, disable the LAN.
Use the following procedure to make
"Control Panel,"
1. Open click
[Power Options].
and then click
If the control panel shows the icon view or classic view, click the [Power Options]
icon.
If you're using Windows 10, click the [Start] button 0 click [All apps] 0 click
[Windows System] 0 click [Control Panel.]
In "Choose a Power Plan,"
2.
If you don't see the "High Performance" plan, click "Show Additional Plans. "
[Change Plan
3. In high performance, click
[Change Detailed Power
4. Click
[+]
5. In detailed settings, click
Disk When the Following Time Elapses."
"Set." [I]
6. Click Click the that appears, and set
Click [OK].
7.
"Edit Plan Settings"
8. Close the
Use the following procedure to make
Open "Control Panel," click
1.
and then click [System].
If the control panel shows the icon view or classic view, click the [System] icon.
If you're using Windows 10, click the [Start] button 0 click [All apps] 0 click
[Windows System] 0 click [Control Panel.]
[Detailed System
2. In the left column, click
"user account control"
3. If a
If you are asked to enter a password for an administrator account, log on to
Windows as a user whose account type is "administrator, " and make the settings
again.
[Settings]
4. In performance, click
[Background Services], and click [OK].
5. Choose
6. Click [OK] to close "System Properties."
Connect the Rubix directly to one of the computer's USB ports.
You must use the included USB cable.
Some commercially available USB cables do not meet the requirements of the USB
standard, and this may prevent the Rubix from operating correctly.
"power option" settings in the control panel.
[System and Security] [System and
or
select [High Performance].
Settings].
Settings].
"Hard Disk,"
for and then click
"Setting (Minutes):"
screen.
"System" settings in the control panel.
[System and Security] or [System and
Settings].
[Yes] or [Continue].
dialog box appears, click
[Detailed Settings]
and then click the
Maintenance],
[+] "Power-Off Hard
for
"None."
to
Maintenance],
tab.