Connecting To A Computer - Roland rubix 22 Reference Manual

Connecting to a Computer

After you have finished installing the USB driver in your computer,
connect the product to your computer as follows.
* To prevent malfunction and equipment failure, always turn
down the volume, and turn off all the units before making any
connections.
* Once everything is properly connected, be sure to follow
the procedure below to turn on their power. If you turn on
equipment in the wrong order, you risk causing malfunction or
equipment failure.
MEMO
After you install the USB driver and connect the Rubix22 /
Rubix24 / Rubix44 to your computer for the first time, it might
take several minutes before the Rubix is ready to use.
Rubix22 / Rubix24 users
* The illustration shows the Rubix22
1. Set the [POWER SOURCE]
switch to the USB port side.
2. Connect
the USB
cable.
Rubix44 users
1. Connect the AC adaptor.
Place the AC adaptor so the
side with the indicator (see
illustration) faces upwards and
the side with textual information faces
downwards. The indicator will light when
you plug the AC adaptor into an AC outlet.
To outlet Indicator
Power cord
3. Connect
the USB
cable.
Connecting to a Mac
* To prevent malfunction and equipment failure, always turn
down the volume, and turn off all the units before making any
connections.
* Once everything is properly connected, be sure to follow
the procedure below to turn on their power. If you turn on
equipment in the wrong order, you risk causing malfunction or
equipment failure.
If you're using a Mac, you don't need to install a USB
driver.
Rubix22 / Rubix24 users
* The illustration shows the Rubix22
1. Set the
switch to the USB port side.
2. Connect
the USB
cable.
Rubix44 users
1. Connect the AC adaptor.
Place the AC adaptor so the
side with the indicator (see
2. Turn the
illustration) faces upwards and
[POWER]
switch
the side with textual information
"ON."
faces downwards. The indicator
will light when you plug the AC adaptor
into an AC outlet.
To outlet
Power cord
Getting Ready to Use the Rubix
[POWER SOURCE]
Indicator
2. Turn the
[POWER] switch
"ON."
3. Connect
the USB
cable.
11