WM_17__Manual_80_210.indd 9
4 P ressandhold the key that does not function
and immediately release it when the device
responds.
• I f the key still does not function as expected,
try pressing it again for a longer period of
time.
5
P ress the
selection key twice
to save your settings
and exit setup
mode.
•
W hen no key
is pressed for 5 minutes or more, the
remote control will exit setup mode,
automatically saving all your settings.
3 U sing the universal
remote control
3.1
Keys and functions
The illustration on page 2 gives an overview of all
keys on the remote control. Try out the keys you
need for operating your devices.
Notes
• K eys having the same functions as the
keys on your original remote control
may have different namings on the
SRP2004WM (e.g. Info / Display).
• O nly functions that are available on your
original remote control can be used
for operating your devices with the
SRP2004WM.
1
..................................... S etup light.
2
. ................................ s elects available source
3
device
• l ights up red when the
remote control is in
setup mode.
• l ights up red when
a remote control
command is being sent.
inputs (antenna, cable,
etc.).
............ d evice selection keys.
Select the device to be
operated.
2 x
EN
9
25-09-0