10-Gigabit Ethernet Module Interfaces; Sfp Modules - Cisco Catalyst 2350 Installation Manual

Connector Specifications

10-Gigabit Ethernet Module Interfaces

The 10-Gigabit Ethernet optical modules use SC connectors or Infiniband 4x connectors, as shown in
Figure B-2
Figure B-2
Figure B-3

SFP Modules

Figure B-4
The Catalyst 2350 switch supports the SFP module patch cable, a 0.5-meter, passive copper cable with
SFP module connectors at each end
switches in a cascaded configuration.
Figure B-4
Catalyst 2350 Switch Hardware Installation Guide
B-2
and Figure B-3.
10-Gigabit Ethernet Optical Module SC Connector
Tx Rx
10-Gigabit Ethernet Infiniband 4x Connector
and Figure B-5 show the SFP module connectors.
Duplex LC Cable Connector
Appendix B
(Figure B-6). The patch cable can connect two Catalyst 2350
Connector and Cable Specifications
OL18479-01