Philips Magnavox REM380 User Manual page 12

QUICK FEATURES SETUP GUIDE (continued)
Device Re-Assignment (e.g., AUD Key Becomes Secondary VCR Key)
x 2
Press SET
until Red Light
blinks twice;
release SET.
1
Programming The FC Keys (See Page 9 For Further Instructions)
x 2
Press SET
until Red Light
blinks twice; will blink twice.
release SET.
* NOTE: If over 100 channels, enter 0-7-1.
1
12
x 2
Enter 9-9-2;
the Red Light
will blink twice.
2
x 2
Enter 9-9-5; Press FC1 or
the Red Light
2
Press component key
to be moved once
(e.g.,VCR).
3
or
Press component
FC2 once. key that controls
channels once (e.g.,
CBL). Then enter
channel # (e.g. 7-1)*.
3
Press component key
to be reassigned once
(e.g., AUD). Red Light will
blink twice. Reassigned key is
now ready for programming.
4
until Red Light
blinks twice;
release SET.
4
x 2
Press SET
5