Table of Contents
Advertisement
BASIC OPERATION
IMMEDIATE RECORDING
SELECTION OF A CHANNEL
Select the channel by using the number buttons on the remote control, or select the
next/previous channel by pressing CHANNEL
To change between single digit and 2-digit channel numbers, press
For example, for channel 24, press
You can record the channel you are watching or a different channel.
1. Insert a video tape into your VCR.
2. Select the channel you wish to record on the VCR.
3. To start recording, press RECORD (
4. To pause during recording, press PAUSE/STILL (
5. To continue recording, press RECORD (
6. To stop recording, press STOP once.
SIMPLE TIMED RECORDING:
1. To specify a stop time, press RECORD (
2. Each additional press of RECORD (
will delay the stop time by 10 minutes.
3. To stop recording at any time, press
STOP (
) once.
NOTES:
If the tape ends before the recording is complete the VCR will stop recording and
rewind.
If the VCR ejects the video tape when you press RECORD (
protected. i.e. record protection tab has been removed.
or
.
then press 2 4.
).
).
).
S T O P
).
)
10
.
1 5 : 3 0
) the tape is record
Advertisement
Table of Contents
