Included Components - Blue Sea Systems 7531 User Manual

Product Dimensions
WARNING
For drip proof performance, and to meet ABYC requirements, the P12 Battery Charger must be mounted vertically as shown below.
7.80"
Clearance for
(198mm)
#12, Ø1/4" M6
mounting hardware
11.18"
(284mm)
14"-20
7.40"
(188mm)
Installation Clearances
TOP
Recommended
top clearance
1.97 " (50mm)
Recommended
side clearance
1.97 " (50mm)
Recommended
overall envelope width
12.40 " (315mm)
6
Specifications are subject to change. See bluesea.com/P12 for current information.
P12
7531 AND 7532 BATTE RY C HAR GER S
12.94"
(328.8mm)
8.46" 4.30"
(215mm) (109.1mm)
Recommended
clearance
for cooling fan exhaust.
do not block!
5.91 " (150mm)
Recommended
overall
envelope height
19.00 " (480.6mm)
Recommended
clearance
for wire access
and inlet airflow.
3.94 " (100.2mm)

Included Components

P12 Battery Charger Hardware:
AC Strain Relief Insulating Cover Screws
M3 x 25mm pan-head machine screws
(Use #1 Phillips screwdriver)
Recommended torque: 5–10 in-lb (0.6–1.1 Nm)
AC Strain Relief
and Insulating Cover
DC Termination Nuts
Pan-Head Machine Screws
1/4"-20 serrated flange hex-nuts
M3.5 x 6mm
(Use 10mm socket wrench with extension)
Recommended torque:
Recommended torque: 70–80 in-lb (8–9 Nm)
10–15 in-lb (1.0–1.8 Nm)
DC Safety Ground Nut
M6 hex-nut
Accessory Pack Includes:
ACR Screw Battery Temperature DC Strain Relief
Terminal Connector Sensor Screw
Clamp Screw
Terminal Connector
M3 x 25mm pan-head
machine screw
Dielectric Grease
Temperature Sensor Dielectric Grease
Flying lead, Battery Temp Sensor with Used for Temperature Sensor and the
peel and stick adhesive Optional Accessory P12 Remote Display Connections. View the
MSDS for the Dielectric Grease at bluesea.com/P12
P12
7531 AND 7532 BATTERY CHARGERS
DC Strain Relief Clamp Screws
M3 x 25mm pan-head machine screws
Recommended torque:
5–10 in-lb (0.6–1.1 Nm)
DC Strain
Relief Clamp
DC Safety Ground Nut DC Termination Nut Mounting Screws
M6 hex-nut 1/4"-20 serrated flange hex-nut #12 x 1-1/4" sheet metal
screws (Use #3 Phillips
screwdriver)
Specifications are subject to change. See bluesea.com/P12 for current information.
7 7