Pre-Ride Checklist - Cycleboard ELITE Owner's Manual

PRE-RIDE CHECKLIST

BEFORE RIDING, ALWAYS MAKE SURE TO THOROUGHLY CHECK YOUR CYCLEBOARD AND ENSURE IT IS SAFE TO OPERATE.
BRAKE
Check the brakes for proper function. When you squeeze the
lever, the brake should provide positive braking action.
FRAME
Check for cracks or broken connections. Although cracked or
broken frames are rare, it is possible for an aggressive rider to
run into a curb or wall and wreck, bend or break a frame. Get into
the habit of inspecting your CycleBoard on a regular basis.
WHEELS AND TIRES
Periodically inspect the tires for excess wear. Confirm tires are
inflated to 15 psi. Always check to ensure wheel bolts are tight.
Note: Front tires with uneven wear can cause dangerous
conditions like speed wobble and should be replaced with new
tires.
STEERING
ALWAYS ensure the 4 underside bolts in the
front steering mechanism are tight before
riding. Add Loctite if they become loose.
HANDLE
Loosen the height adjustment thumb screw and handle clamp to
adjust the handle to your desired height. (See Fig. 3) Make sure
to securely tighten it before riding.
HARDWARE
Check all parts such as nuts, bolts, cables, fasteners, etc. to
ensure they are secure and assembled correctly before riding. If
the CycleBoard is damaged or not functioning properly, do not
ride.
LAWS AND REGULATIONS
Always check and obey any local laws or regulations.
INSURANCE
Do not assume that your existing insurance policies necessarily
provide coverage for use of this product. Check with your
insurance company for information regarding insurance.
USAGE
Make sure you are physically and mentally ready and capable to
ride your CycleBoard. This is a motorized three-wheeled product
and riders must familiarize themselves with the characteristics
Page 21