The Lower Panel
The lower panel
can be removed
to help make it easier to clean
under the
range and to check
for installation
of the anti-tip
bracket.
To remove
the lower panel:
1. Pull out bottom of panel
2. Slightly swing out and lift panel
to
remove
from top clips.
To replace
the lower panel:
1. Place notches
in top of panel
over
the top clips.
2. Swing down and push bottom of
panel
to secure bottom clips.
To verity the anti-tip
bracket
is engaged:
l
Remove
the lower panel.
l
Look to see if the anti-tip
bracket
is attached
to floor with screws.
l
Make sure one rear leveling
leg
is positioned
under the anti-tip
bracket.
l
See Installation
Instructions
for
further details.
20