The Lift-Up Cooktop; The Removable Oven Door; The Lower Panel - Whirlpool FEC350V Use And Care Manual

The lift-up cooktop
(all models except FEP335V)
1. Lift front of cooktop at corners.
2 Swing up the support rod (if
included on your model).
3. Carefully lower the cooktop onto
the support rod.
NOTE: Models FEP310V and
FEP2lOV do not include support
rods. For these models, you must
hold up cooktop while cleaning.
4. Wipe surface under cooktop with
warm, soapy water. Use a soap-
filled plastic scouring pad on
heavily-soiled areas.
Personal Injury And Product
Damage Hazard
. Be sure the rod fits in the groove
in the front right corner of the
cooktop and is held securely. The
cooktop could accidentally fall
and injure you.
. Do not drop the cooktop. Damage
can result to the porcelain and the
cooktop frame.
The removable oven door
Removing the oven door will help make
it easier to clean the oven.
Bum And Electrical Shock Hazard
Make sure all controls are OFF and
the oven is cool before removing
oven door. Failure to do so can
result in bums or electrical shock.
1. Open the door to the first stop
position.
2. Hold the door at both sides and lift
it at the same angle it is in.
3. To replace, fit the bottom corners
of the door over the ends of the
hinges.
Push the door down evenly. The
door will close only when it is on
the hinges correctly.
The lower panel
(Model FEPZlOV)
The lower panel can be removed to help
make it easier to clean under the range.
To remove the lower panel, lift it up
and out.
To replace the lower panel, line it up
with the bottom of the range, then push
in and down to hook it in place.
Page 10