Table of Contents
Advertisement
To demonstrate
or Test the Display,
touch and hold the RESET/TEST Pad until you hear two beeps.
The Performance
Control Package
will show in the following
order:
1.
5 seconds
2.
5 seconds
3. 5 seconds;
4 beeps
All steps will repeat
as long as the TEST light
is on. The 4 beeps
will only sound at the end
of the first scan.
Touch the RESET/TEST Pad to return the Display to operation
monitorrng. A single beep WIII be heard
Reading
the SYSTEMS SENTINEL@ II Performance
Control
Package...
Each symbol on the Check Point Display has a meaning
When more than one symbol glows, there is
more than one message. The meaning
of each symbol IS still the same.
The OK Light - When the "OK" glows. refrigerator
check points are OK. The scanning
lights show that
check pornts are berng monitored
DOOR OPEN Symbol-Glows
when any door is open.
If a door IS open for more than three minutes, a beep-
ing sound starts.
To clear
the symbol
and
to stop the beeping
sound, close the door.
TOO WARM Symbol
- Means the refrigerator
and/or
freezer may be too warm for safe food storage
The
TOO WARM Symbol and one or both of the compart-
ment temperature
displays will come on to show if the
refrigerator
and/or
freezer are TOO WARM. You will
hear a beeping
sound every two minutes.
The TOO WARM Symbol may glow and a beeping
may start as soon as you plug
in the refrigerator.
Otherwise,
they will start about
1 1/2 hours after the
TEMPERATURE SENSOR detects
warm temperatures.
Temperatures
may be warm because:
l
A large amount of food is added.
l
Doors are opened
often
[especially
in warm
weather).
l
The power has been off for more than a few hours.
l
The control settings are incorrect,
To stop the beeping,
touch and hold RESET/TEST
Pad until you hear two beeps. This puts the Perform-
ance Control Package
in TEST After the refrigerator
reaches
a proper
and cold enough
temperature,
return the Control Package
to operation
scanning
by touching
the RESET/TEST Pad.
FLASHINGTOO WARM Symbol-Means
the refrigera-
tor and/or
freezer were too warm, but it's OK now
Check for possible
food spoilage.
To clear the sym-
bol, touch the RESET/TEST Pad.
DOOR OPEN, ALERT
TOO WARM, ALERT
FLASHING TOO WARM, ALERT
The ALERT Symbol
comes on when the refrigerator
or freezer has been warm for 6 hours or more: there
has been an open door for 4 or more hours; or the
refrigerator
or freezer has been warm for 6 or more
hours, but is OK now. Check
for possible
food
spoilage.
The CHECK COIL Symbol
comes
on every
two
months to remind you to check for dust and lint on the
condenser
coil behind the base grille (See page 13
for cleaning
instructions.)
To clear the symbol
touch the RESET/TEST Pad.
Advertisement
Table of Contents
