Automatic Channel Setup - Philips VRZ220AT Owner's Manual

VRZ220/250 layout 4/8/99 10:11 PM
14 Automatic Channel Setup (cont'd)
Reviewing Memorized Channels
1
Press the MENU button.
SELECT op CHOOSE B
PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
TO END PUSH EXIT
2
Press the PLAY/o button or the STOP/p button to select
TUNER SET UP, then press the F.FWD/B button.
SELECT op CHOOSE B
TV
CABLE TV
AUTO PROGRAMMING
ADD/DELETE CH
CH MEMORY REVIEW
TV STEREO
2ND AUDIO
TO END PUSH EXIT
Note: TV STEREO and 2ND AUDIO are not available in the TUNER
SET UP menu of the VRZ220.
3
Press the PLAY/o button or the STOP/p button to select
CH MEMORY REVIEW, then press the F.FWD/B button.
A list of programmed channels will appear on-screen.
If all the programmed channels don't fit on the screen, press
the F.FWD/B button to see the remaining channels. Then
press the REW(ind)/s button to return to the first screen of
channels.
If you do not press any buttons within 10 seconds, you will
either go to the next screen of channels or you will return to
the previous menu.
4
Press the STATUS/EXIT button once or twice to exit.
Page 14
ON
ON
2-3
POWER VCR/TV EJECT
1 2 3
4 5 6
CHANNEL
7 8 9
0 +100
4
SPEED TIME SEARCH MEMORY
1
MENU STATUS/EXIT CLEAR SLOW
REWIND /PLAY F.FWD
REC/OTR /STOP PAUSE/STILL
Helpful Hint
• You can not enter the TUNER SET
UP menu during a recording.