Rear Panel 23 - Philips VRZ220AT Owner's Manual

VRZ220/250 layout 4/8/99 10:11 PM
VRZ250
AC Power Cord
Connect to a stan-
dard AC outlet to
supply power to the
VCR.
Page 23
AUDIO IN Jacks
Connect cables coming from the AUDIO OUT Jacks of a camcorder,
another VCR, or an audio source here. Details are on page 32.
The VRZ250 is shown here. The VRZ220 has only one AUDIO IN Jack.
AUDIO OUT Jacks
Connect cables going to the AUDIO IN Jacks of a cam-
corder, another VCR, or an audio source here. Details are on
pages 32 and 38.
The VRZ250 is shown here. The VRZ220 has only one AUDIO
OUT Jack.
VIDEO OUT Jack
Connect a cable going to the VIDEO IN
Jack of a camcorder, another VCR, or an
audio-visual source (laser disc player,
video disc player, etc.) here. Details are on
pages 32 and 38.
VIDEO IN Jack
Connect a cable coming from the
VIDEO OUT Jack of a cam-
corder, another VCR, or an
audio-visual source (laser disc
player, video disc player, etc.)
here. Details are on page 32.

Rear Panel 23

ANT(enna) IN Jack
Connect your antenna or cable
here. Details are on pages six-10.
ANT
AUDIO
IN
L
OUT IN
R
OUT
VIDEO
CH3 CH4
IN
OUT
CH3/CH4 Switch
Set to channel 3 or 4
to use your TV with
your VCR. Details are
on pages six-nine.
OUT Jack
Use the supplied RF coaxi-
al cable to connect this
jack to the ANTENNA IN
Jack on your TV, Cable
Box, or Direct Broadcast
System. Details are on
pages six-nine.