Philips VRZ220AT Owner's Manual page 28

VRZ220/250 layout 4/8/99 10:11 PM
28 Timer Recording
Follow the steps below to program your VCR to record TV pro-
grams while you're away from home. The VCR will turn itself on,
record, and turn itself off automatically. Before you begin:
Set up the channels at the VCR.
Set the clock.
Put a tape in the VCR. Make sure the tape's record tab is intact
and the tape is long enough to record the program(s).
Put the VCR in VCR position. The VCR/TV light will appear on
the display panel. If it does not, press the VCR/TV button once.
Do each step within 60 seconds of the previous step.
1
Press the MENU button.
SELECT op CHOOSE B
PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
TO END PUSH EXIT
2
Press the PLAY/o button or the STOP/p button to select
PROGRAM, then press the F.FWD/B button.
SELECT op CHOOSE B
ONCE
DAILY
WEEKLY
PROGRAM REVIEW
TO END PUSH EXIT
3
Press the PLAY/o button or the STOP/p button to select
a ONCE, DAILY, OR WEEKLY recording. Then, press
the F.FWD/B button.
ONCE: The VCR will record a TV program on any day you
choose, up to 12 months away.
DAILY: The VCR will record the same channel every day from
Monday to Friday – starting at the same time and recording for
the same length of time.
WEEKLY: The VCR will record the same channel on the same
day, at the same time, and for the same length of time every
week.
DAILY PROGRAM (MON-FRI)
Daily
Recording
(example)
SELECT PROGRAM NUMBER
TO END PUSH EXIT
Page 28
PROGRAM -1 2 3 4 5 6 7 8-
2-3
POWER VCR/TV EJECT
1 2 3
4 5 6
CHANNEL
7 8 9
0 +100
SPEED TIME SEARCH MEMORY
1
MENU STATUS/EXIT CLEAR SLOW
REWIND /PLAY F.FWD
REC/OTR /STOP PAUSE/STILL
Helpful Hint
• If you need to make a correction
while programming a timer record-
ing, press the CLEAR button until
the cursor is flashing on the item
you want to change. Then enter the
correct information.