Universal Electronics Potenza ST Manual page 4

PROGRAM YOUR REMOTE CONTROL
This remote control is already pre-programmed to control your Set Top Box
(STB). The instructions below will program this remote to control your TV.
1. Manually turn ON the TV that
you want to setup on the
remote
2. Press and Hold
TV key blinks twice
3. Press and release the TV key.
The TV key will stay lit.
4. Find your TV and brand from
the chart below and note the
DIGIT key assigned to your
brand. Press and hold down
the DIGIT key for your
device/brand while pointing
the remote to the device.
5. Let go of the key when your
device turns OFF. Setup for
that device is complete.
To program this remote control to
your other devices
see the instructions below the
table.
until the
,